- 101
- 726 944
BallsOutPerformance
United States
Приєднався 23 лип 2006
Welcome to BallsOutPerformance. My name is Archie. Been working on cars since I was 15. I specialize in Japanese cars but also work on a lot of GM trucks. On this channel you will see performance, repairs, customization, bodywork/ paint, suspension modification, tint, car wraps, audio, guns, etc. Really no limitations. Stay tuned to check out my current and future projects. Be sure to comment and leave suggestions. Thanks.
How to Flake paint a roof. Start to finish. (Prep, Mix, Spray, & Flow Coat)
In this episode we do a custom chameleon flake paint job on the roof of our 2002 Civic Project. We cover every aspect of the job from start to finish.
Переглядів: 173
Відео
How to polish an older paint job
Переглядів 1863 місяці тому
In this installment we do a quick compound and polish on our 8th gen Civic. We painted this vehicle approximately 5 years ago, and we aimed to remove some of the 5 years of wear.
Chevrolet Tahoe Rear Window regulator replacement 2007-2014
Переглядів 2,4 тис.3 місяці тому
In this installment we replace a broken door window regulator and motor assembly on a 2008 Chevrolet Tahoe left rear door
Chevy Tahoe Dashboard Replacement how to. Cracked dash repair. DIY
Переглядів 5 тис.6 місяців тому
On this episode of BOP we tackle a common issue on the 2007-2014 Chevrolet truck and suv / Tahoe. That is the cracking dashboards. Instead of just slapping an ugly cover on it, lets replace it. I follow you on a complete step by step of how we fully replace a dashboard.
Adding bluetooth to factory stereo. Chevy Tahoe. Crux BTS-GM1X
Переглядів 1,1 тис.7 місяців тому
In this installment we add bluetooth to the factory head unit of a 2008 Chevrolet Tahoe.
Paint Reveal! DIY paint job finally finished!
Переглядів 1398 місяців тому
On this episode we go over the finished product of our 2002 Civic 7th gen paint job. Look back to our previous videos on this project where we go over the complete process of bodywork / paint. Thanks.
Flipping a car for big profit! How to make money flipping cars
Переглядів 2,1 тис.8 місяців тому
In this installment we buy, repair, and sell a 2003 Chevrolet Suburban 2500 for 3x profit.
Front axle seal replacement Chevrolet Tahoe 4x4 2008
Переглядів 2,8 тис.10 місяців тому
In this installment of the BallsOutPerformance channel, we replace a Drivers front axle seal on a 2008 Chevrolet Tahoe 4x4.
Spraying the last of the parts for the 7th Gen Civic
Переглядів 6310 місяців тому
Spraying the last of the parts for the 7th Gen Civic
CUT AND BUFF! How to wet sand and buff a new paint job. 7th Gen Civic paint job part 5
Переглядів 26211 місяців тому
In installment we discuss and demonstrate how to wet sand and buff a new paintjob. We deal specifically in removing defects and minimizing orange peel. We go over tools, materials, and techniques. Thanks for watching.
Paint day for our 7th gen Honda Civic - DIY paint job at home
Переглядів 44111 місяців тому
On this episode we continue with our paint project on our 2002 Honda Civic. We finally get the car sprayed and discuss the process and the next steps for the vehicle.
Block sanding primer and prepping for paint on 7th gen Honda Civic. How to.
Переглядів 201Рік тому
On this episode (The 3rd installment of our 7th gen Civic paoint job. We discuss block sanding primer and prepping primer and existing paint for a new paintjob.
Spraying primer on our 7th gen Honda Civic! How to primer bodywork.
Переглядів 148Рік тому
In this installment we spray high build primer on our project 7th gen Honda Civic. We cover topics like prep, cleaning, masking, mixing, gun setup, and spraying primer over bodywork.
Body working our 7th gen Honda Civic for a new paint job!
Переглядів 438Рік тому
Body working our 7th gen Honda Civic for a new paint job!
2001 - 2005 Civic trunk and gas door release cable replacement DIY How to
Переглядів 4,4 тис.Рік тому
2001 - 2005 Civic trunk and gas door release cable replacement DIY How to
Replacing all hoses, belt, transmission filter, thermostat and more on 2006-2011 Honda civic 1.8 r18
Переглядів 3,3 тис.Рік тому
Replacing all hoses, belt, transmission filter, thermostat and more on 2006-2011 Honda civic 1.8 r18
How to replace injectors Honda Accord 1.5 turbo Earthdreams 2018 DIY
Переглядів 45 тис.Рік тому
How to replace injectors Honda Accord 1.5 turbo Earthdreams 2018 DIY
LRB Speed Aluminum Door Panels - EG Civic
Переглядів 1,7 тис.Рік тому
LRB Speed Aluminum Door Panels - EG Civic
Honda Power Steering Whine Fix. EASY!
Переглядів 1,2 тис.Рік тому
Honda Power Steering Whine Fix. EASY!
Rear wheel bearing replacement 2001-2005 Honda Civic How To
Переглядів 3,7 тис.Рік тому
Rear wheel bearing replacement 2001-2005 Honda Civic How To
Building Intercooler piping for K20 Turbo EG Civic Hatch
Переглядів 558Рік тому
Building Intercooler piping for K20 Turbo EG Civic Hatch
Full Race intercooler install on K swap EG Civic
Переглядів 515Рік тому
Full Race intercooler install on K swap EG Civic
How to fix your own wrecked car and MAKE MONEY doing it!
Переглядів 156Рік тому
How to fix your own wrecked car and MAKE MONEY doing it!
Camshaft thrust plate seal replacement 2006 - 2011 Honda Civic 1.8
Переглядів 24 тис.Рік тому
Camshaft thrust plate seal replacement 2006 - 2011 Honda Civic 1.8
Building and heat wrapping hood exit exhaust for k20 turbo EG Civic
Переглядів 3942 роки тому
Building and heat wrapping hood exit exhaust for k20 turbo EG Civic
How to replace AC clutch without removing compressor 2005 - 2015 Toyota Tacoma
Переглядів 54 тис.2 роки тому
How to replace AC clutch without removing compressor 2005 - 2015 Toyota Tacoma
Catch can and PCV setup for k20 turbo EG hatch how to.
Переглядів 4,5 тис.2 роки тому
Catch can and PCV setup for k20 turbo EG hatch how to.
Lowering a Ford Ranger 3 / 6" for cheap - How to
Переглядів 39 тис.2 роки тому
Lowering a Ford Ranger 3 / 6" for cheap - How to
Adding keyless entry to 2001 - 2005 Honda Civic How to DIY
Переглядів 15 тис.2 роки тому
Adding keyless entry to 2001 - 2005 Honda Civic How to DIY
Where did you buy the parts ?
I saw your vide and want to thank you! Showing step by step how to replace the magnetic clutch. Is it the same process/technique for a 2016 Tacoma SR5?
Maybe not identical but probably similar.
Good video bro. Straight to the point and good explanations and directives.
Glad it helped
you check the mass air flow sensor?
There was no need to in this scenerio.
You make it look easy. Mine is a 2001 Tacoma but should be the same procedure, thanks!
I'm having the same issue on my '04 V6!
Thank you sir!
Fuel injectors are discontinued NEW FUEL INJECTOR PART# 16453-5r1-j00 Verified on website
If the clutch is bad is there potential for anything to seize while driving and cause catatonic engine failure? I have other things to work on and would ignore this for awhile if I can. Thanks dude great video
It depends on what part is failing. If its just the magnetic coil, then the ac just simply wont work. But sometimes the bearing in the cluth fails and the clutch can come apart leaving you stranded.
@@ballsoutperformance Thanks dude appreciate ya!
Are you in Houston area?
North carolina
Is there any way we can get a copy of those instructions you was going by?
Unfortunately, I no longer have access to that service.
Hi thanks for the awesome video. I had my struts replaced about a year ago with some RockAuto Monroe (172185/172186) quickstruts. The ride quality seems to be getting progressively worse (I feel the road too much) and lately it seems that I’m bottoming out, but only on the front right side. It’s difficult to re-create the problem as it only happens when I hit a certain type of bump (ridge?) on the right side. If both wheels are going over the bump it won’t happen. It actually sounds like I’m getting hit by a hammer on the undercarriage. It’s hard to explain but it’s startling. Anyway my question is, is it possible I could have an improperly fitted or installed strut on that side? What else could be going on?
Also too, I’m reading that people generally say Monroe struts are garbage for the Civic (mine 2005 EX) and that I should’ve got the KYB G struts. Does it matter what brand struts I have in here? Oh yeah and also my Civic has 300k on it and all we’ve done so far on the front end is tires, struts, tie-rod ends, rack and axles.
It hard to say exactly what it is. Based on what you have changed, i would check the lower control arm bushings for play, thats what was worn and noisy on mine. As for the monroe struts, i cant comment, ive never installed them on any of my personal vehicles. I have used kyb with good success. I would check those lower control arm bushings and go from there. I would then check for loose play at the top of the strut where it bolts to the chassis. The upper strut mount or as I call it the "top hat". Sometimes that can get worn and get play over time causing movement and noise.
Thank you very much I will check that out. I don’t know what I’m doing but your video really helped me a lot.
Glad to help!
Do u have to replace the sparkplugs as well when u do this job? I just replaced my spark plugs abt 2-3 days ago and i dont wana have to buy another whole new set
You dont have to. I did because they were oem plugs and the car had been experiencing a rich condition. If you just changed yours then theres no need to do so again
@@ballsoutperformance bet thank u man. Do u think my injectors are bad? My cars a 2021 1.5t with 23k miles but shes running weird rn n having an the symptoms of bad injectors
I cant say. Get it checked out by a reputable shop familiar with hondas.
@@ballsoutperformance thanks man
You could Wrap the rest of the Car to match the roof tho
I think ima just rock it as is. Can always change it later
God Job
Is the passenger side the same procedure? I have a 2014 that ill be doing
No. Unfortunately, the passenger side is a lot more involved
@@ballsoutperformance that's what it looks like. We have a Tahoe in my Ford dealership shop in Norway. I'll have to look it up on Auto Data
Dude I just had the same problem with that one bolt lol
Have that Issue on my New 23-24 Honda Accord Hybrid, All New Crv Hybrids have it too.. Supposably has to do with Capless Fuel tank , Dirt enters the tank when you insert the fuel pump, dirt accumulates in the tank and the fuel filter doesn’t catch most of the dirt. It later travels into fuel injectors leaving them stuck open.. High Recommend Dropping and Cleaning the Fuel Tank and Changing the Fuel Filter when you change the Injectors
Great job…love it!
Every time you said lovely assistant I cracked up 😂 thanks for the video.
Nice video I thought my issue was whole Compressor until I watched this.. and Since I didn’t hear yah Cuss once I’m gonna give it a try
I edited out the cussing. Jk. Its not bad
Ha’ i knew it Even with your southern charm I expect a lil’ f
Hey I’m actually looking for good snap ring plier set now Any suggestions?
The icon set from harbor freight is a good value
Awesome video! Pretty sure my girls civic has a bad control arm.
Would a fuel injector throw a P219F code.? Or would anybody know what does the code actually mean… thanks 🙏🏼
Do you have the link to the replacment part? Looking in google just keeps giving me covers that are $70. Im pretty sure they are not them. Thanks.
Buy from your local dealer. If you buy online, shipping will probably be a small fortune.
Dang ole leaf springs
does this apply on honda hrv 2020?
Do you have any suggestions on what to do if that shaft does not want to come out?
Slide hammer
Great video!! Thanks a lot!
I'm wondering if you can help me out I replace the clutch and pulley but now the pulley is not spinning continuously it spins randomly Altogether And then it just stops And the belt just slips on the pulley do you think the spacing with the shims isn't enough?
I sure thank you for this video. I had never changed out a compressor clutch and this helped tremendously. When I removed the bolt, my compressor was seized on but after a little PB blaster, I was able to grab it with a filter wrench and coax it off finally. I did remove my radiator shroud and fan but it wasn’t really necessary. Thanks again for this video. It saved me a ton of money!
Glad it helped
Have just finished doing this repair on my Civic defineitly worth replacing this Oring as when it's worn out you will loose alot of oil and it makes a big mess this was also running down in to my gearbox and causing my clutch to slip now that it's replaced and and cleaned up no more clutch issues
💯👍
There were issues with my clutch on a Honda Jazz and the mechanic just found this same seal leaking oil, hopefully the clutch issue gets sorted when the seal is replaced.
@bonneyferns Hopefully it solves your problem been driving my Civic for about a week now after doing this repair and all is good
Did you keep the original passenger side airbag cover? It matches the new dash well?
Yes and yes
Thanks for the video. Big help. I got my clutch off eBay for less than $50. I will say this job is doable with patience. However, borrow or invest in HIGH quality snap ring pliers. I used the straight pliers and able to maneuver handles into fan housing to access rings straight on. Thanks again.
Do you have to remove the whole steering assembly so get clearance to access the lower control arm nuts?
thank you for the video. you helped me a lot
pretty sure my drier was double sealed thats why i have a leak sprayed soapy water and thats where it was bubbling
what is the size of the bolt connected to the metal fuel line? 10mm?
Did you have to cut into the cab?
No
I have a 2020 1.5 turbo I noticed on a cold start the card would vibrate for a few second and now all my warning lights are on. I believe I'm having the same issue please help
That could be anything could be bad fuel, clogged injectors or the battery needs replaced the new Honda engine as are so dependent on the 12v batteries having a good charge if the voltage is dropping it can set off many bells and whistles, you really need to plug in an OBD scanner to see if any codes are stored on the computer that will give you a fair idea, I service Hondas and Toyotas for a living, it could be something that simple, usually is. Worst case scenario Carbon fouling on the inlet valves or injectors, but would usually need to be a high mileage for that to happen or a poorly serviced car.
What happened to the crown vic from a couple years ago?
Started on a full repaint. Got most of the bodywork done, then life happened. Its been sitting for a while.
I thought GM stopped making these cause of the law suits cause of the cracking. did demand make them start producing them again? if you do this in the future, I would take the steering column plastics off, it isn't that hard, I have done it
Im not sure about that. They are still available from the dealer which is where this one was obtained.
Doo Dat!!
Thank you for this video. I'm having this same issue of engine struggling on a cold start, and misfires. I've changed plugs, coils, cleaned MAF and throttle body, changed oil, added injector cleaner to my fuel, and the issue persists. At this point, I'm 95% positive it's faulty fuel injectors.
Probably so
You're the man!
Sho nuf
Are any 2006 to 2011 (8th Gen) civic sedan parts interchangeable? Like can I put a 2006 window in my 2008? I would assume basically all parts on the same generation would be interchangeable... Got a side window from salvage yard out of a different year model but the same generation and sedan also, that should be fine right? Already replaced the window regulator and it seems to line up the same as old window.
Most everything 06 to 11 is the same as long as its the same (sedan or coupe
Also, is this same or similar process on a 2020?
What was the reputable dealer
Should have spritzed the Centre section (After an Acetone wipe) It rusts up as well. OR you could have spritzed on Graphite Lube instead. . It lives longer and rusts much less than the the Cera stuff. Graphite is Not a heat barrier though. IF that matters.
Nice video. I feel we are all driving a ticking time bomb with these Accords. Head gasket and fuel injectors. 😔 my second time watching this video. I’m getting ready. 😂
Yea the owner of this one traded it for a camry after finding out about the issues.
Where do you order the dash from??
Local chev dealer
I think I watched this video before if I'm not mistaken but I have a quick question for you guys as far as I understand I am able to swap the fenders from a 92 to my 01 but with the fenders need any modifications like new screw holes or whatever to be adjusted to be able to fit them thanks in advance😊